Skip to content
Locations
385-430-2066
Menu

A breaker that trips once after a hair dryer, space heater, and microwave run at the same time may simply be doing its job. A breaker that trips every week, lights that dim when the AC starts, or a panel that feels warm is different. Those are electrical panel upgrade warning signs worth taking seriously before a small inconvenience becomes a safety problem.

Your electrical panel is the traffic controller for every circuit in your home. Older homes across Utah County were often built for a much lighter electrical load than a modern household uses today. Between larger HVAC equipment, home offices, kitchen appliances, EV chargers, hot tubs, finished basements, and smart-home devices, a panel that once had plenty of capacity can get pushed to its limits.

Electrical Panel Upgrade Warning Signs to Watch For

Breakers trip repeatedly

Circuit breakers are designed to shut off power when a circuit becomes overloaded or develops a fault. One occasional trip has a cause that may be easy to address. Repeated trips on the same circuit, especially when normal appliances are in use, deserve a professional diagnosis.

The answer is not to keep resetting the breaker or replace it with a larger one. A larger breaker on wiring that cannot safely carry the added current can create a fire hazard. An electrician needs to determine whether the issue is an overloaded circuit, a failing appliance, damaged wiring, a weak breaker, or an undersized panel.

Lights flicker, dim, or brighten unexpectedly

A brief light dip when a large motor starts can happen, but frequent flickering or major changes in brightness are not something to ignore. You may notice it when the furnace blower turns on, the air conditioner starts, laundry is running, or a refrigerator cycles.

Sometimes the problem is limited to one fixture or one circuit. Other times, it points to a loose connection, a service issue, or an electrical panel that needs attention. If lights brighten noticeably in one area while dimming in another, schedule an inspection promptly.

The panel is warm, noisy, or smells burnt

A healthy electrical panel should not feel hot to the touch. Buzzing, crackling, a burning-plastic smell, scorch marks, discoloration, or corrosion around the panel are urgent warning signs. Turn off power only if it can be done safely, keep people away from the area, and call a licensed electrician right away.

Do not remove the panel cover to investigate. Even when a main breaker is off, parts of the equipment may still be energized. This is a job for trained professionals with the right testing equipment and safety procedures.

You rely on extension cords and power strips

Power strips are useful for low-demand electronics, but they should not become permanent solutions for a home with too few outlets or too few circuits. If bedrooms, garages, or workspaces rely on extension cords every day, your electrical system may no longer match how your family lives.

High-draw equipment such as space heaters, portable air conditioners, microwaves, refrigerators, and power tools should not be run through ordinary extension cords or overloaded power strips. Adding dedicated circuits may solve the immediate problem, while an electrical panel upgrade may be needed if there is no room or capacity to add them safely.

Your panel uses fuses or has no open breaker spaces

A fuse box is not automatically unsafe, but it is a strong reason to arrange an electrical evaluation. Fuses can be reliable when properly sized and maintained, yet many older fuse-based systems were not designed around current household demands. Problems arise when homeowners install the wrong fuse size or make other modifications to keep power flowing.

A breaker panel with every space occupied is another practical concern. Tandem breakers can be appropriate in some panels when installed according to the manufacturer listing, but they are not a universal fix for a crowded panel. If you are planning a new appliance, basement finish, garage workshop, or EV charger, lack of space needs to be addressed before installation begins.

You are adding major electrical equipment

Some upgrade decisions are planned, not emergency-driven. An EV charger, electric range, hot tub, heat pump, central air conditioner, electric water heater, or solar equipment can significantly change your home’s electrical demand. The same is true when converting a garage, adding a room, or finishing a basement.

A modern electrical panel can make these improvements safer and easier to install. That does not mean every project requires a full service upgrade. It depends on the existing panel rating, available capacity, condition of the wiring, the load calculation, and local code requirements. A licensed electrician can calculate the demand rather than guess based on the panel’s age alone.

Why Older Panels Can Fall Behind

Many homes have 100-amp service, and some of those homes continue to operate safely. But 100 amps can become limiting when a household adds all-electric equipment or several large loads. Homes with 150-amp or 200-amp service generally have more room for modern needs, though capacity still must be verified.

Age matters, but condition and manufacturer matter too. Certain older panel brands and equipment types have documented safety concerns or may no longer have readily available listed replacement parts. An inspection can identify the panel and evaluate its condition without assuming that every older panel needs immediate replacement.

The goal is not to sell more power than your home needs. It is to provide enough properly protected capacity for your present load, your planned upgrades, and the safe operation of every circuit.

What an Electrical Panel Upgrade Usually Includes

An upgrade is more than swapping a metal box on the wall. A properly planned project may include a load calculation, a new panel with correctly sized breakers, grounding and bonding updates, service equipment changes, and new circuits for equipment that needs dedicated power. Depending on the home, the service meter base, exterior disconnect, wiring, or utility connection may also need work.

Permits and inspections matter. They verify that the work meets current safety requirements and can be especially valuable when selling a home, completing a remodel, or making an insurance claim after damage. A qualified electrician should explain the scope clearly, including what is included, what is optional, and whether the utility company needs to coordinate any part of the project.

There can be trade-offs. A panel replacement may improve safety and create space for circuits without increasing the home’s incoming service capacity. A full service upgrade provides more capacity, but it can involve added coordination and cost. If the panel is in good condition and the problem is one overloaded branch circuit, a new circuit may be the most sensible solution.

What to Do When You Notice a Problem

If you smell burning, see smoke or scorching, hear persistent arcing or crackling, or find a panel that is hot, treat it as an urgent electrical concern. Keep clear of the panel and call for professional help. If there is an immediate threat, contact emergency services first.

For recurring breaker trips, flickering lights, a full panel, or an upcoming appliance installation, schedule an electrical inspection before the issue gets worse. Take note of which breaker trips, what was running at the time, and whether the problem affects one area or several. That information helps the electrician find the real cause faster.

Avoid temporary workarounds. Do not bypass breakers, install oversized fuses, stack adapters, or repeatedly reset a breaker that continues to trip. Those fixes can hide the warning while allowing heat and damage to build behind the walls.

For homeowners in Alpine and surrounding communities, Gillette Services can evaluate the panel, explain the findings in plain language, and help you choose a safe path forward without the runaround. Whether the right answer is a repair, a dedicated circuit, or a larger service upgrade, prompt attention gives you more choices and more peace of mind.

Your electrical panel rarely asks for attention until something is already inconvenient. Listening to the early signs gives you the chance to fix it fast, protect your home, and plan the upgrade on your terms.

Carrier Factory Authorized Dealer
We Are A Proud Carrier Factory Authorized Dealer
As a Carrier Factory Authorized Dealer, Gillette Services - Plumbing, Heating and Air Conditioning has met Carrier’s rigorous standards for technical training, customer satisfaction, and business excellence.
Carrier President's Award Winner
8-Time Carrier President’s Award Winner
We have won the Carrier President’s Award eight times, consecutively, starting in 2019, and we were Utah’s first contractor to pursue it.
We’ve Got an Expert for That

A/C Service

Keep your system running efficiently with our professional A/C tune-ups.

Air Conditioning Repair

Fast, reliable repairs to get your cooling system back up and running.

Heating Service

Keep your home warm and your heating system running smoothly all season.

Ductless HVAC

Energy-efficient ductless systems for precise comfort control in any room.

Heat Pumps

Efficient heating and cooling in one system — year-round comfort, lower energy bills.

Tankless Water Heaters

Enjoy endless hot water on demand with an energy-efficient tankless system.

Commercial HVAC

Keep your business comfortable and running efficiently with reliable heating and cooling solutions.

Protection Plans

Priority service, exclusive discounts, and scheduled maintenance in one membership.

Gillette Techs at Door
Gillette Tech with Homeowner at Table
Gillette Tech Furnace Door
Gillette Van Home 1
Recent Posts From Our Blog

Electrical Panel Upgrade Warning Signs at Home

Learn the electrical panel upgrade warning signs that protect your Utah home, plus when a licensed electrician should inspect your...

10 Signs of Hidden Water Leaks in Your Home

Know the signs of hidden water leaks before small plumbing trouble becomes stained walls, high bills, mold, or serious damage...

Is a Whole House Water Filtration System Worth It?

A whole house water filtration system can improve water quality at every tap. Learn what it removes, when it helps,...

Furnace Maintenance Checklist for Winter at Home

Use this furnace maintenance checklist for winter to protect comfort, curb energy waste, and catch heating problems before Utah's coldest...

Why Is My AC Blowing Warm? Common Causes

Why is my AC blowing warm? Learn the common causes, safe checks to make first, and when to call for...

When to Call a Professional Drain Cleaning Service

A professional drain cleaning service clears stubborn clogs, protects pipes, and helps Utah County homes avoid backups, odors, and costly...

Commercial HVAC Maintenance That Prevents Downtime

Commercial HVAC maintenance helps businesses prevent downtime, control energy costs, and keep employees, customers, and equipment comfortable year-round.

Water Heater Installation That Fits Your Home

Plan water heater installation with confidence. Learn how to choose the right size, fuel, efficiency, and installer for dependable hot...

Is a Ductless Mini Split Right for Your Home?

Considering a ductless mini split in Utah? Learn how it heats and cools, where it works best, and what to...

Heat Pump Installation: What Utah Homes Need

Heat pump installation can lower energy use and improve year-round comfort. Learn what Utah homeowners should expect before replacing their...

When You Need 24 Hour Emergency Plumbing Service

Need 24 hour emergency plumbing service in Utah County? Know what to do first, when to call, and how fast...

Are Tankless Water Heaters Right for Your Home?

Tankless water heaters can cut standby energy loss and deliver water on demand. See how sizing, water quality, and installation...

Carrier Logo

North American Technician Excellence logo

Google Guaranteed Logo

Energy Star Logo

Air Conditioning Contractors of America Quality Assured logo

BBB Accredited Business logo

Your Family Deserves to Be Comfortable
We Make Sure They Are

When your heat goes out on a cold Utah night or your AC quits in the middle of July, your family shouldn’t have to wait. Gillette Services gets there fast, fixes it right, and has your home feeling like home again — the same day.

Happyfamily3
Call Schedule Now Contact